Toshiba e-STUDIO287CS, User Manual, Page: 115 / 368

EDITING FUNCTIONS
- 115 -
2
1
3
4
5
6
7
4
Press [OK].
Omit blank page is now set.
5 Select other copy modes as required, and
then press the [START] button on the
control panel.
Scanning and copying start. A message notifying you of
the number of the blank sheets appears for approx. 5
seconds.
Outside Erase
You can whiten a shadow-like dark part which has appeared
outside of the copied image; this has been caused by a gap
between the original glass and the platen sheet. This function
is called “outside erase”. It is useful when you place thick
originals such as booklets on the original glass.
Note
• This function is disabled when you place originals on the
RADF or you place them on the original glass with the
RADF or the Original Cover closed fully.
• When this function is enabled, the automatic density
adjustment is disabled. Adjust the density level manually.
• Originals with an intricate outer shape (e.g. an original with
cut-out parts on its edge) may not be copied properly
because this function may not detect the border between
the original and areas not belonging to it.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper
size.
2
Select the drawer for the desired paper size.
3 Press [OUTSIDE ERASE] on the EDIT menu.