Toshiba e-STUDIO287CS User Manual Download Page 105

Page: 105 / 368

EDITING FUNCTIONS

- 105 -

Select [MIRROR] or [NEG/POS], and then
press [OK].

Select other copy modes as required, and
then press the [START] button on the
control panel.

XY Zoom

You can change the reproduction ratio in both vertical and
horizontal directions separately. This function is called “XY
zoom”.

Note

• The reproduction ratio is changeable from 25 to 400%.

However in the following cases, this range is 25 to 200%.
-

When the color mode is FULL COLOR or AUTO COLOR

When the original mode is IMAGE SMOOTHING

When the color mode is BLACK and the original mode is
PHOTO

When TWIN COLOR COPY is selected

When MONO COLOR is selected

When the original is placed on the RADF

Place paper in the drawer(s).

When using bypass copying, be sure to set the paper
size.

Place the original(s).

Press [XY ZOOM] on the EDIT menu.

Set the reproduction ratio in both vertical
and horizontal directions.

1) Press [X], and then press either [

25%] or

[

400%] for a horizontal direction.

2) Press [Y], and then press either [

25%] or

[

400%] for a vertical direction.

3) Press [OK].

Select other copy modes as required, and
then press the [START] button on the
control panel.

100%

200%

Summary of Contents for e-STUDIO287CS
















































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO287CS

Reviews:

Toshiba e-STUDIO287CS, User Manual, Page: 105 / 368

Search results

Summary of Contents for e-STUDIO287CS

Reviews: