Toshiba e-studio281c, Service Handbook, Page: 292 / 678

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 26
Adjustment method 2
Test pattern (Block)
Fig. 3-13
This adjustment should be applied for each printout of the test pattern. (Skip this if the test pattern is
printed correctly.)
The order of the adjustment, test patterns and codes to be used are listed below.
C
M K
K
Y C
Y
C
M K
C
M
K
K
Y
C
Y
C
M
K
C M K
K Y C Y
C M K
Adjust the image positions of K, C and Y so that the colors do not overlap.
[Details of adjustment area]
Pattern on the leading edge side
Pattern on the trailing edge side
[Test pattern]
Equal gap between the image
positions of each color is the
optimal condition.
Optimal condition
Feeding direction
The colors overlap
(Adjustment is needed).
The colors are allowed to con-
tact each other.
Acceptation
Rejection
Gap: approx. 0.169 mm