Toshiba e-studio2309a, User Manual, Page: 41 / 236

2.COPY FUNCTIONS
Basic Copy Procedure 39
2 COPY FUNCTIONS
The following types of originals can be used but need extra care:
 Originals that you cannot slide with your fingers or whose surface is specially treated: They should be
fanned well before loading since they may not be able to be separated from each other at feeding.
 Originals that are folded or curled: They should be smoothed out before being loaded.
When black streaks appear
If the scanning area or the guide area is dirty, image problems such as black streaks may occur. Weekly
cleaning of these areas is recommended.
 P.218 “Regular Cleaning”

Copying originals
Follow the common basic instructions below to make a copy.
1
Place the original(s).
 Placing originals on the original glass
1) Raise the Platen Cover or the Reversing Automatic Document Feeder.
2) Place the original face down on the original glass.
3) Align the original with the top-left corner of the original glass.
4) Lower the Platen Cover or the Reversing Automatic Document Feeder carefully.
Do not place heavy objects (4 kg/8.8 lb. or over) on the original glass and do not force it
down.
It may breaks the glass and could cause injury.
 When you copy originals with folds or wrinkles, smooth out the folds and wrinkles first. Then,
place the original on the original glass and close the Platen Cover or the Reversing Automatic
Document Feeder to start copying.
 If a shadow of the folds or wrinkles appears on copies although you smooth out them, adjust the
exposure or use the “BACKGROUND ERASE” function.
 When you place a booklet-type original, strong light may leak out while copying. Do not look
directly at the original glass.
 When you place a thick booklet, do not close the Platen Cover or the Reversing Automatic
Document Feeder forcefully; you can still make copies without closing the cover or feeder.
 If lights from lighting devices are applied to the original glass, the original size may not be
detected correctly. In this case, specify the original size.
 P.49 “Enlarging or reducing the copy size”
When you use the transparent original such as overhead transparencies and tracing paper, place a
blank plain sheet of paper - the same size or a larger sheet - over the original, otherwise the copied
image could be stained.