Toshiba e-studio222cs User Manual Download Page 139

Page: 139 / 166

Appendix A - menu system > 139

HONE

BOOK

NOTE
e-STUDIO223CS and e-STUDIO263CS only.

ITEM

OPTION

OPTION/DESCRIPTION

Speed Dial

Select a speed dial number.
Max. 100 speed dial entries.

Name

user defined

Enter a name for the speed dial entry.
Max. 24 characters.

Fax Number

user defined

Enter the fax number for the speed dial
entry.
Max. 40 digits.

Group No.

Add to a registered group.

Edit

Edit settings. Refer to options above for
details.

Delete

Yes

, No

Delete entry.

Sort By Name

Sort list of entries by name.

Sort By Number

Sort list of entries by number.

Group No.

Select a group number.
Max. 20 group entries.

Name

user defined

Enter a name for the group dial entry.
Max. 16 characters.

Speed Dial

Select and assign speed dial entries from
resultant list.
Max. 100 entries can be register to a group.

Edit

Edit settings. Refer to options above for
details.

Delete

Yes

, No

Delete entry.

Sort By Name

Sort list of entries by name.

Sort By Number

Sort list of entries by number.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands