Toshiba e-studio222cs User Manual Download Page 108

Page: 108 / 166

Maintenance > 108

LEANING

...

THE

UNIT

CASING

Switch the printer off. Refer to

“Switching off” on page 19

for details.

Wipe the unit surface with a soft cloth moistened sparingly with water or neutral

detergent.

Use a soft dry cloth to dry the unit surface.

Switch the printer on.

...

THE

LED

HEAD

Clean the LED heads when printing does not come out clearly, has white lines or when text

is blurred.
There is no need to switch off the printer to clean the lens.

Gently raise the scanner.

Press the cover release (a) and open the top cover (b) fully.

CAUTION!

Use a clean, moist, lint-free cloth for cleaning. Do not use benzine,

thinners or alcohol as a cleaning agent.

Summary of Contents for e-studio222cs







































































































































































Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands

Toshiba e-studio222cs, User Manual

Search results

Summary of Contents for e-studio222cs

Reviews:

Related manuals for e-studio222cs

Brands by name

Popular brands