manualshive.com logo in svg

Toshiba e-STUDIO2010AC, Imaging Manual

Share
Download
Toshiba e-STUDIO2010AC Imaging Manual Download Page 324

5.Scanning-specific Adjustments

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC

 © 2018 TOSHIBA TEC CORPORATION All rights reserved

5-18

5.8

To Register the Original Mode Optimal for a Particular 
Type of Original (To have “Custom” selected)

Explanation

If the value for [05] code is adjusted in existing original mode (Text /Photo, Text, Photo or Gray scale), in 
order to clearly scan a particular type of original, other types of original may not be clearly scanned. In 
this case, add the original mode option adjusted for a particular type of original as “User Custom” mode. 
To have “User Custom” selected, add the value adjusted for [05] code in “User Custom” mode to the one 
in reference original mode.
Select reference original mode for “User Custom” from among the original mode options.
To have “User Custom” in the Black mode, select the existing original mode option as reference original 
mode.
To have “User Custom” in the Full color mode (including the Auto Color mode) selected, select the 
existing original mode or “e-document*” mode option where the value has been adjusted to identify 
whiteout areas, as reference original mode.

• This adjustment will have an effect only on the image scanned in the Black mode or the Full color 

mode (including the Auto Color mode).

* e-document: This is the mode that corresponds to the law in Japan.

Procedures

• Perform the adjustment in accordance with the procedures below.
• Only the service technician must perform procedures (1) and (2).
• Both the service technician and the user can perform procedure (3).

(1) Select [08 SETTING MODE]. Change the value for code [7401] or [8303] to select reference original 

mode for “User Custom” mode from among the original mode options.

• Select the original mode option, which is most likely to be matched with the image quality the user 

desires.

For the Black mode

For the Full color mode

After selecting the reference original mode option, perform the next procedure.

Value for 08-7401

Reference original mode

0

Reserved (Default)

1

Text/Photo

2

Text

3

Photo

Value for 08-8303

Reference original mode

0

Reserved (Default)

1

Text/Photo

2

Text

3

Photo

4

e-document

Summary of Contents for e-STUDIO2010AC





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands