manualshive.com logo in svg

Toshiba e-STUDIO2010AC, Imaging Manual

Share
Download
Toshiba e-STUDIO2010AC Imaging Manual Download Page 291

 © 2018 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC

4-1

4. e-Filing-specific Adjustments

4.1

To Clearly Store a B/W Image in the Auto Color Mode

Explanation

When a black-and-white original containing black-and-white photo images is scanned in the Auto Color 
mode and stored in the e-Filing box (Scan to Box), it is stored with binary data, with reference to a 
threshold value. This may make a dark area blurred and a light area eliminated. Adjust the threshold 
value, in order to clearly store the black-and-white original in the Auto Color mode.

• This adjustment will have an effect on the image stored using Scan to File and Scan to E-mail.

After adjustment

Before adjustment

The light image becomes blurred and text 
becomes illegible.

Even the light image is not blurred.  Text is 
clear and legible.

After the threshold value was adjusted

Stored in the Gray scale mode

Summary of Contents for e-STUDIO2010AC





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands