manualshive.com logo in svg

Toshiba e-STUDIO2010AC, Imaging Manual

Share
Download
Toshiba e-STUDIO2010AC Imaging Manual Download Page 247

3.Printer-specific Adjustments

 © 2018 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC

3-87

3.10 To Prevent Dark Toner from Coming Off

Explanation

When highly colored lines, where a large accumulated amount of C, M, Y and K toners are used, are 
created on raster data (image), such as BMP, GIF, JPEG and TIFF, and printed on the rough surface of 
paper or thick paper, the toner may come off the paper. This is because the C, M, Y and K toners may be 
overlaid, the paper may be extremely thick or the surface may be rough, and the amount of toner used 
may be insufficient. Adjust the limit value of the maximum amount of toner used, in order to avoid a toner 
fixing problem.
This adjustment does not affect a single color of C, M, Y and K, or bright colors such as red and green.

Procedures

(1) Perform toner used amount adjustment.

For details of the adjustment procedure, refer to "3.1.9  Toner Used Amount Adjustment".

Caution after the adjustment

Nothing in particular.

Before adjustment

After adjustment

The dark toner comes off.

The dark toner is securely fixed.

Summary of Contents for e-STUDIO2010AC





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands