Toshiba E-STUDIO2006 Page 459 Service Manual Download

Page: 459 / 730

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A

ERROR CODE AND TROUBLESHOOTING

8 - 81

8.4.14

White spots

Fig.8-16

Defective area

Step

Check items

Prescription

Developer unit,

Toner cartridge

Is the toner density in the developer

material appropriate?

Check and correct the auto-toner

sensor and toner supply operation.

Check if the amount of the toner is

sufficient in the toner cartridge.

Is the doctor-sleeve gap proper?

Adjust the doctor-sleeve gap.

Developer material, Toner,

Drum

Using the specified developer

material, toner and drum?

Use the specified developer material,

toner and drum.

Have the developer material and

drum reached their PM life?

Replace the developer material and

drum.

Is the storage environment of the

toner cartridge 35°c or less without

dew?

Use the toner cartridge stored in the

environment with specification.

Is there any dent on the drum

surface?

Replace the drum.

Is there any film forming on the

drum?

Clean or replace the drum.

Main charger

Is there any foreign matter on the

charger?

Remove it.

Is the needle electrode dirty or

deformed?

Clean or replace the needle

electrode.

High-voltage transformer

(Main charger / Developer

bias / Transfer roller unit)

Is the high-voltage transformer

output defective?

Adjust the output, or replace the

transformer.

Transfer roller unit

Is there any foreign matter such as

fiber in the paper transport area of

the transfer roller unit?

Clean the transfer roller unit.

Is there any foreign matter on the

transfer roller? Is there any

abnormality on its appearance?

Remove the foreign matter or replace

the transfer roller.

Feeding direction

Summary of Contents for E-STUDIO2006


















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-STUDIO2006

Reviews:

Related manuals for E-STUDIO2006

Brands by name

Popular brands

Toshiba E-STUDIO2006, Service Manual

Search results

Summary of Contents for E-STUDIO2006

Reviews:

Related manuals for E-STUDIO2006

Brands by name

Popular brands