Toshiba E-STUDIO2006 Page 318 Service Manual Download

Page: 318 / 730

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A

SETTING / ADJUSTMENT

6 - 24

6.4.2

Density adjustment

The center density and the density variation controlled by density adjustment keys can be adjusted as
follows.

< Adjustment Mode (05) >

Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.

(1) While pressing [0] and [5] simultaneously, turn the power ON.

(2) Key in a code and press the [START] button.

(3) Key in an adjustment value.

(To correct the keyed-in value, press the [CLEAR/STOP] button.)

(4) Press the [OK] button to store the value.



The equipment goes back to the test mode A screen.

(5) Press the [SETTINGS] button and then the [START] button. Then perform test copying.

(6) If the desired image density has not been attained, repeat step (1) to (5).

Original mode

BackGround

Erase

Item to be

adjusted

Remarks

Text/Photo

Photo

Text

7114

7116

7115

7143

Manual

density mode

center value

The larger the value is, the darker the

image becomes.

Acceptable values: 0 to 255

(Default: 128)

7123

7125

7124

7142

Automatic

density mode

The larger the value is, the darker the

image becomes.

Acceptable values: 0 to 255

(Default: 128)

Summary of Contents for E-STUDIO2006


















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-STUDIO2006

Reviews:

Related manuals for E-STUDIO2006

Brands by name

Popular brands

Toshiba E-STUDIO2006, Service Manual

Search results

Summary of Contents for E-STUDIO2006

Reviews:

Related manuals for E-STUDIO2006

Brands by name

Popular brands