Toshiba E-STUDIO2000AC, Software Installation Manual, Page: 133 / 164

INSTA
LLING SCAN
DRIVER
A
N
D UTILI
TIES (
W
indows
)
Installing Scan Driver and Utilities 133
0.
Installing Scan Driver and Utilities
This section describes how to install the scan driver and utilities.

Installing the scan driver and utilities using the installer
Perform installation corresponding to your Windows computer. However, you need to follow a different procedure
when you install WIA driver into Windows Vista or later / Windows Server 2008 or later. For the installation procedure
for these operating systems, see the following page:

P.135 “Installing WIA driver to Windows computer”
To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation
and uninstallation of client software.
1 Insert the Install Disc into the disc drive.
If Software Installer does not automatically start, use the Explorer to open the “e-STUDIO” folder in the Install
Disc and double-click “Setup.exe”.
2
Select [I agree to the terms of the License Agreement.] and click [Next].
To change the display language, select the desired language from the [Select Language] box.
3
Click [Scan Utility].
4 Confirm the list of the software to install and click [Install].
5
When the installation is complete, click [Finish].
The main menu is displayed.