Toshiba E-STUDIO2000AC, Software Installation Manual

Page: 105 / 164

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Setting Up the UNIX/Linux Filters 105
INSTALL
ING PRINTER
DR
IVERS FOR
UNIX/Li
n
ux
Creating a print queue manually on HP-UX
1 Log on to the root account.
2
Open your UNIX/Linux editor.
3 Create the following file.
/etc/lp/interface/<queue name>.conf
4 Add a line as below in the <queue name>.conf.
dest=<IP address>
5 Save the file.
6
Enter the following command to change the working directory:
cd /etc/lp/interfaces/
7
Enter the following command:
chmod +x <queue name>.conf
8
Enter the following command:
chown lp:lp <queue name>.conf
9
Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
10
Enter the following command:
echo $?
11
If “0” is outputted on the screen, turn the scheduler OFF. Enter the following command:
/usr/sbin/lpshut > /dev/null 2>&1
12
Enter the following command:
Color MFP:
/usr/sbin/lpadmin –p<queue name> -v/dev/null \
-mnet_estcolor –orm<queue name> -orpprint -ob3
Black and White MFP:
/usr/sbin/lpadmin –p <queue name> -v/dev/null \
-mnet_estbw –orm <queue name> -orpprint -ob3
13
Enter the following command:
/usr/sbin/accept <queue name>
14
Enter the following command:
enable <queue name>
15
If you turn OFF the scheduler in step 10, turn the scheduler ON. Enter the following command:
/usr/sbin/lpsched > /dev/null 2>&1
Creating a print queue manually on IBM AIX
1
Enter the following command:
ls /opt/toshiba/tap/filter
2 If the above directory does not exist, enter the following command:
mkdir /opt/toshiba/tap/filter
3
Log on to the root account.
4
Open your UNIX/Linux editor.
5
Create the following file.
/opt/toshiba/tap/filter/<queue name>.conf