Toshiba E-STUDIO2000AC, Software Installation Manual

Page: 141 / 164

IN
STA
LLING NETW
OR
K
FA
X UTILITIES
(W
indow
s)
Installing Network Fax Utilities 141
0.
Installing Network Fax Utilities
Perform installation corresponding to your Windows computer.
To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation
and uninstallation of client software.
1
Insert the Install Disc into the disc drive.
If Software Installer does not automatically start, use the Explorer to open the e-STUDIO folder in the Install Disc
and double-click “Setup.exe”.
2
Select [I agree to the terms of the License Agreement.] and click [Next].
To change the display language, select the desired language from the [Select Language] box.
3
Click [Fax Driver].
4
Confirm the list of the software to install and click [Install].
When you want to verify and/or change the SNMP settings to find the target TOSHIBA MFPs, see step 4 in the
following section:

P.26 “Procedure for Recommended Installation”
Since the subsequent procedure is the same as that for printer driver installation, the steps are omitted. See the
following pages according to the connection environment.

P.39 “Raw TCP/LPR printing”

P.45 “SMB printing”