manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 49 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 49

6. Enter the new name, and then press [OK].
7. Press [OK].
8. Press the [User Tools] key.

Address Book: Switch Title

Specifies the title to select a name.
The default setting is [Title 1].

Back Up / Restore Address Book

You can back up the machine's address book to external storage or restore the backup copy from
the external storage.
Restore data overwrites Address Book data stored on the machine, and clears the counter of each
registered user of the machine.
You can also back up and restore the machine's Address Book using Web Image Monitor or
SmartDeviceMonitor for Admin. For details, see the Help files of Web Image Monitor on the supplied
CD-ROM or SmartDeviceMonitor for Admin.

• Back Up

You can back up the machine's address book to external storage.

• Restore

You can restore the backup copy of the address book from external storage.

• Format

You can format the external storage.

• Obtain Media Info

The free space and occupied space of the external storage are displayed.

Display / Print Counter

Allows you to view and print the number of prints.

• Display / Print Counter

Displays the number of prints for each function (Total, Copier, Printer, A3/DLT, Duplex Scanner
Send).

Administrator Tools

47

1

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments