manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 303 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 303

Registering SMTP and LDAP Authentication

This section describes how to register SMTP and LDAP Authentication.

SMTP Authentication

This section describes how to register SMTP Authentication.
For each user registered in the Address Book, you can register a login user name and login password to
be used when accessing a SMTP server.
To use a SMTP server, you need to program it beforehand.

• When [Do not Specify] is selected for SMTP Authentication the User Name and Password that you

have specified in SMTP Authentication of File Transfer settings applies. For details, see "File Transfer".

1.

Press the [User Tools] key.

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book Management].

5.

Check that [Program / Change] is selected.

6.

Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, folder name, and e-mail address.

7.

Press [Auth. Info].

8.

Press [Specify Other Auth. Info] right "SMTP Authentication".

Registering SMTP and LDAP Authentication

301

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments