Toshiba e-studio1105 Operating Instructions Manual Download Page 298

Page: 298 / 396

Press [Administrator Tools].

Press [Address Book: Program / Change / Delete Group].

Check that [Program / Change] is selected.

Press the group key you want to change.

You can search by the registered name, folder name, and e-mail address.

To change the group name and key display, press [Change] right "Group Name" or "Key
Display".

Enter the new group name or key display, and then press [OK].

To change the title, press the title key right "Select Title".

10.

To change the registration number, press [Change] right "Registration No.".

11.

Enter the new registration number using the number keys.

12.

Press the [ ] key.

13.

Press [OK].

14.

Press [Exit].

15.

Press the [User Tools] key.

Deleting a Group

This section describes how to delete a group.

Press the [User Tools] key.

6. Registering Addresses and Users for Scanner Functions

296

Summary of Contents for e-studio1105












































































































































































































































































































































































































Search results

Summary of Contents for e-studio1105

Reviews:

Toshiba e-studio1105, Operating Instructions Manual, Page: 298 / 396

Search results

Summary of Contents for e-studio1105

Reviews: