manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 296 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 296

9.

Press [OK].

10.

Press [Exit].

11.

Press the [User Tools] key.

Deleting a Group Within Another Group

This section describes how to delete a group within another group.

1.

Press the [User Tools] key.

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book: Program / Change / Delete Group].

5.

Check that [Program / Change] is selected.

6.

Select the group that you want to delete from.

Press the group key, or enter the registered number during the number keys.
You can search by the registered name, folder name, and e-mail address.

7.

Press [Add to Group].

The keys of groups in which the group is registered appear highlighted.

6. Registering Addresses and Users for Scanner Functions

294

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments