manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 262 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 262

10.

Select the functions to be used with the user code from "Available Functions".

11.

Press [OK].

12.

Press [Exit].

13.

Press the [User Tools] key.

• You can enter a one-to eight-digit user code.
• To register the name, see "Registering Names".

• p.254 "Registering Names"

Changing an User Code

This section describes how to change a user code.

• Even if you change a user code, the counter value will not be cleared.

1.

Press the [User Tools] key.

2.

Press [System Settings].

6. Registering Addresses and Users for Scanner Functions

260

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments