manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 212 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 212

SNMP

Using the SNMP manager, you can get information about the machine.
The SNMP agent operating on UDP and IPX is incorporated into the built-in Ethernet board of this machine.
This machine also supports SNMPv3, which increases user authentication, data encryption, and access
control security.
To encrypt communication by SNMPv3, you must specify the machine's encrypted password.

• If you changed the machine's community name, change the configuration of the connected computer

accordingly, using SNMP Setup Tool. For details, see SNMP Setup Tool Help.

The default community names are [public] and [admin]. You can get MIB information using these community
names.

Start SNMP Setup Tool

• Windows 2000:

1.

Click the [Start] button.

2.

Point to [SmartDeviceMonitor for Admin] on the [Programs] menu.

3.

Click [SNMP Setup Tool].

• Windows XP/Vista/7, Windows Server 2003/2003 R2/2008

1.

Click the [Start] button.

2.

Point to [SmartDeviceMonitor for Admin] on the [All Programs] menu.

3.

Click [SNMP Setup Tool].

5. Monitoring and Configuring the Printer

210

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments