manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 193 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 193

netware

Use the "netware" command to view and configure the NetWare settings such as the print server name or
file server name.

NetWare Printer Server Names

msh> netware pnamecharacter string

• Enter the NetWare print server name using up to 47 characters.

NetWare File Server Names

msh> netware fname character string

• Enter the NetWare file server name using up to 47 characters.

Encap type

msh> netware encap {802.3|802.2|snap|ethernet2|auto}

Remote Printer Number

msh> netware rnum [0-254]

• The default is 0.

Timeout

msh> netware timeout [3-255]

• The default is 15.

Printer server mode

msh> netware mode pserver
msh> netware mode ps

Remote printer mode

msh> netware mode rprinter
msh> netware mode rp

NDS context name

msh> netware context "character string"

SAP interval

msh> netware "sap_interval [0-3600]"

It can be entered between 0 and 3600 seconds.

Setting login mode for file server

msh> netware login server

Setting login mode for NDS tree

msh> netware login tree

Remote Maintenance by telnet

191

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments