Toshiba e-studio1105, Operating Instructions Manual, Page: 185 / 396

Viewing and specifying DNS server address selection (obtained from the dhcpv6 server/user
specified value)
msh> dhcp6 dnsaddr {dhcp|static}
DUID(DHCP unique ID) deletion and display
msh> dhcp6 duid clear
Viewing and specifying the time required to re-obtain the parameter obtained from dhcpv6
msh> dhcp6 option lifetime [0-65535]
• It can be entered between 0 and 65535 minutes.
• The default is 60 minutes.
• If you specify "0", you cannot re-obtain the value.
diprint
The direct printing port enables direct printing from a network-connected computer.
Use the "diprint" command to change direct printing port settings.
View settings
The following command displays the current direct printing port settings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect on
conn multi
apl async
• The "port" specifies the port number of the direct printing port.
• The "bidirect" setting indicates whether the direct printing port is bidirectional or not.
Setting timeout
msh> diprint timeout [30-5535]
• You can specify the timeout interval to use when the printer is expecting data from the network.
• The default is 300 seconds.
• This command functions in conjunction with the "lpr" command.
Specifying the number of concurrent connections
msh> diprint conn {multi|single}
Remote Maintenance by telnet
183
5