manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 179 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 179

msh> 8021x imca {on|off}

• You can enable or disable the certificate when the intermediate certificate authority is present.

The default is "off".

msh> 8021x srvid "character string"

• You can set the server ID and subdomain of the certificate server.
• Usable characters: ASCII 0x20-0x7e (128 bytes). The default is blank.

msh> 8021x subdomain

• You can specify permissions for the subdomain.

msh> 8021x clear {a each command|all}

• Returns the selected setting to its default value.
• If you specify "all", all settings will be restored to their default values. However, IEEE 802.1x

Auth. status (enable or disable) for Ethernet will not be initialized.

access

Use the "access" command to view and configure access control. You can also specify two or more access
ranges.

View settings

msh> access

IPv4 configuration display

msh> access ID range

IPv6 configuration display

msh> access ID range6

IPv6 access mask configuration display

msh> access ID mask6

IPv4 configuration

msh> access ID range "start-address end-address"

Example: to specify accessible IPv4 addresses between 192.168.0.10 and 192.168.0.20:

msh> access 1 range 192.168.0.10 192.168.0.20

IPv6 configuration

msh> access ID range6 "start-address end-address"

Example: to specify accessible IPv6 addresses between 2001:DB8::100 and 2001:DB8::200.

msh> access 1 range6 2001:DB8::100 2001:DB8::200

Remote Maintenance by telnet

177

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments