Toshiba e-STUDIO 850 Series, Manual

Page: 86 / 274

2 Getting Started
84 Getting Started with e-Filing Web Utility
Pages option will be automatically disabled.
Hole Punch — Select whether the document is hole-punched or not. When you want to
hole-punch the document, select how the document will be hole-punched.
Page Number - Position — Select whether the page numbers are printed on the pages.
When you want to print the page numbers, select where the page numbers are to be
printed.
Page Number - Initial Page — Enter the first number that applies to the first page of the
document. When the “Cover/Sheet Insertion - Use Front Cover” is enabled, the front
cover is counted as the first page, and the first page of the document is counted at the
second page.
Time Stamp - Position — Select whether the print time is printed in each page or not.
When you want to print the time stamp, select where you want the time stamp printed.
Image Shift - Position — Select whether the printed images are shifted or not. When
you want to shift the printed images, select the direction to be shifted.
Shift Margin - Front — Select the width of the margin that is added to the side when the
printed images are shifted.
Shift Margin - Back — Select the width of the margin that is added to the opposite side
when the printed images are shifted.
Cover/Sheet Insertion - Use Front Cover — This sets front cover printing which allows
you to insert or print a cover on a sheet fed from a different tray than the Paper Source
option. To enable front cover printing, check on the box and select the location from
where a cover sheet is to be fed and the print style to be used.
Cover/Sheet Insertion - Use Back Cover — This sets back cover printing which allows
you to insert or print a cover on a sheet fed from a different tray than the Paper Source
option. To enable back cover printing, check on the box and select the location from
where a cover sheet is to be fed and the print style to be used.
Cover/Sheet Insertion - Insert Pages — This sets sheet insertion printing which allows
you to insert a sheet between pages, or print a specific page on a sheet fed from a tray
other than the Paper Source option. This option is useful when you want to insert a blank
sheet between chapters, or when you want to print chapter cover pages on the different
paper. To enable sheet insertion printing, check on the box and select the location from
where inserted sheets are to be fed and the print style to be used. Then, enter the page
numbers you want to insert, and separate them with commas if multiple pages are
specified, in the Pages field.
Cover/Sheet Insertion - Interleave Pages — This sets the interleaving page feature
that is useful when you want to insert paper of a different type (or from another source)
between every page of your print job. For example, you could use this option to insert
blank, colored sheets between overhead transparencies. To enable interleaving pages,
check on the box and select the location from where sheets are to be fed. Also, check
the “Duplicate” check box if you want to print previous page images on the inserted
sheet.
If you enable the Interleave Pages option after enabling the Staple option, the Staple
option will be automatically disabled.
Paper Type (Insert) — When you select “Bypass Tray” for the paper source of either the
“Use Front Cover”, “User Back Cover”, “Insert Pages”, or “Interleave Pages” option,
select the paper type for the paper fed from the Bypass Tray.
When the User Management Setting is enabled, the maximum number of copies that is
allowed for the department and user will be displayed in the upper right of the page.