manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 92 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 92

4 EDITING FUNCTIONS

90    Image Shift

5

Adjust the width of the binding margin.

1) Press [FRONT MARGIN] and adjust the binding margin width on the front side using [

0 mm] (0") and [

100 

mm] (3.94"). (The width on the back side will be also adjusted in the same way.)

2) Press [BACK MARGIN] and adjust the binding margin width on the back side using [

0 mm] (0") and [

100 

mm] (3.94"). (Only the width on the back side will be adjusted.)

3) Press [OK].

Note that a left/right binding margin will be created on the opposite side on the back side of paper in duplex 
copying. (For example, when a binding margin is created on the right of the front side of the paper, it will be 
created on the left of the back side.)

6

Press [OK].

7

Select other copy modes as required, and then press the [START] button on the control 
panel.

„

Creating bookbinding margin

You can easily make a binding margin when you copy a book-type original on both sides of the paper.

 

 P.80 “Making a 2-sided copy from a book-type original”

1

Press [IMAGE SHIFT] on the EDIT menu.

2

Press [BOOK].

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments