manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 54 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 54

3 BASIC COPY MODES

52    Paper Selection

„

Copying mixed-size originals in one operation

You can copy a set of originals whose sizes are individually different, using the RADF (Reversing Automatic Document 
Feeder). 
The original sizes that can be mixed are as follows:
North America: LD, LG, LT, LT-R, COMP
Other than North America: A3, A4, A4-R, B4, B5, FOLIO

1

Place paper in the drawer(s).

The bypass tray cannot be used. Use the drawers.

2

Adjust the side guides to the widest original, and then align the originals against the 
side guide on the front side.

When copying originals of different widths, the copied image of the smaller one may be skewed because it does 
not touch the side guide on the rear side.

3

Press [ZOOM] on the touch panel.

4

Press [MIXED SIZE].

When original widths are the same

When original widths are not the same

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments