manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 35 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 35

2.HOW TO MAKE COPIES

Making Copies    33

2 HOW TO MAKE COPIES

„

Scanning the next original during copying

Even if copying is in progress or “READY (WARMING UP)” is displayed on the touch panel, you can scan the next original 
(auto job start).

1

Place the original(s).

2

Set the number of copy sets and the copy modes as required. 

The new job starts in the copy modes that you previously selected unless you select other modes.

3

Press the [START] button on the control panel.

A maximum of 1000 sheets can be scanned per 1 copy job or up 
until the embedded memory becomes full.

Confirming auto jobs

You can confirm which jobs are in waiting on the touch panel or cancel them as required. For details, see the following 
page:

 

 P.164 “Confirming Copy Job Status”

Canceling jobs being scanned

Press the [STOP] button on the control panel to stop a job while originals are 
being scanned. 
When you press [JOB CANCEL] on the touch panel or the [FUNCTION 
CLEAR] button on the control panel while the scanning is being paused, the 
scanning will end. (In this case, the data which were scanned before the job 
was paused will be copied.) To restart the scanning, press the [START] 
button.

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments