Toshiba e-studio 5560c Copying Manual Download Page 160

Page: 160 / 188

6 TEMPLATES

158 Changing Data

Changing template data

In the template menu, select the group to which the desired template is registered.

1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or keying in its group number (3 digits).
3) Press [OPEN].

To switch the menu

Press

or .

Enter the password as follows and then press [OK].

When the public template group is selected:

Press [PASSWORD] and then enter the Admin Password (6 to 64

characters) with the buttons on the touch panel or the digital keys on the control panel.

When a private group is selected:

Press [PASSWORD] and then enter the password (up to 20 characters) with

the buttons on the touch panel or the digital keys on the control panel. If no password is set, go to step 3.

Summary of Contents for e-studio 5560c




























































































































































































Search results

Summary of Contents for e-studio 5560c

Reviews:

Toshiba e-studio 5560c, Copying Manual, Page: 160 / 188

Search results

Summary of Contents for e-studio 5560c

Reviews: