Toshiba e-studio 5560c Copying Manual Download Page 158

Page: 158 / 188

6 TEMPLATES

156 Recalling Templates

Press the button for the desired template.

To switch the menu

Press

or .

Templates with the automatic start function enabled can be identified with

. If this mark is displayed, you can

press it to immediately start the operation of the functions set in the template.

Key in the password for the selected template. (If no password is set, go to step 8.)

1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital keys on the

control panel.

2) Press [OK].

Confirm that “Updated the template setting” is displayed on the touch panel.

The message is displayed for approx. 3 seconds.

Select other copy modes as required, and then press the [START] button on the control
panel.

Summary of Contents for e-studio 5560c




























































































































































































Search results

Summary of Contents for e-studio 5560c

Reviews:

Toshiba e-studio 5560c, Copying Manual, Page: 158 / 188

Search results

Summary of Contents for e-studio 5560c

Reviews: