manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 157 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 157

6 TEMPLATES

 Recalling Templates    155

Recalling Templates

When you recall a template, the functions set in the template will be available automatically. If the automatic start function 
is enabled, this equipment will automatically start the operation of each function when you press the button for the 
corresponding template.

1

Place paper in the drawer(s).

2

Place the original(s).

3

Press [TEMPLATE] on the touch panel.

The template menu appears.

4

Press the button for the group to which the desired template is registered.

You can also select the group by keying in its group number (3 digits).

To switch the menu

Press  

or .

5

Key in the password when you have selected the private group. (If no password is set, 
go to step 6.)

1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital keys on the 

control panel.

2) Press [OK].

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments