manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 153 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 153

6.TEMPLATES

Registering Templates    151

6 TEMPLATES

1) Press [PASSWORD] and then enter the password (up to 20 characters) with the buttons on the touch panel or 

the digital keys on the control panel. The characters keyed in appear as asterisks (*).

2) Press [RETYPE PASSWORD], and then key in the password again.
3) Press [OK].

The symbols below cannot be used.
' \ % & < > [ ]

AUTOMATIC START:

 Press [ENABLE] if you want the operation of set functions to start immediately after pressing 

a button for the corresponding template. Press [DISABLE] if you do not want it to start until you press the 
[START] button on the control panel.

Even when the automatic start function is enabled, you need to enter the user name and password when 
recalling the template in the following cases. For details of the User Authentication for Scan to E-mail and the 
user management function, ask your administrator.

y

When the User Authentication for Scan to E-mail is enabled and the user management function is disabled

y

When both the User Authentication for Scan to E-mail and the user management function are enabled, but 
the user names and passwords are different

When you have entered all the necessary items, press [SAVE].
The template is now registered and the menu returns to the one immediately before registration.

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments