Toshiba e-studio 5560c Copying Manual Download Page 141

Page: 141 / 188

5.IMAGE ADJUSTMENT

Using Image Adjustment Functions 139

5 IMAGE ADJUSTMENT

Adjust the red color or the red-and-black area.

Red in original

Press

of yellow or magenta to adjust the red color balance.

Range Adjustment

Press

to adjust the red-and-black area. When you set the red area to be larger, the area to be

copied in red becomes larger. When you set the black area to be larger, the area to be copied in black becomes
larger.

After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust color balance of yellow and magenta on every density area, press [DETAIL] and go to the next
step.

Press

on each density area to obtain the desired color balance.

For example, when you adjust the high density area of magenta (M) to the

side, the magenta in its high density

area will become darker.

After completing the adjustment, press [OK].

Canceling color balance adjustment

Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].

If you want to cancel the adjustment of all colors, press [RESET], and then [OK].

Summary of Contents for e-studio 5560c




























































































































































































Search results

Summary of Contents for e-studio 5560c

Reviews:

Toshiba e-studio 5560c, Copying Manual, Page: 141 / 188

Search results

Summary of Contents for e-studio 5560c

Reviews: