Toshiba e-studio 5560c Copying Manual Download Page 139

Page: 139 / 188

5.IMAGE ADJUSTMENT

Using Image Adjustment Functions 137

5 IMAGE ADJUSTMENT

Press

of the color to obtain the desired color balance.

After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step.

Press

of the color on each density area to obtain the desired color balance.

For example, when you adjust the high density area of magenta (M) to the

side, the magenta in its high density

area becomes darker.

After completing the adjustment, press [OK].

Canceling color balance adjustment

Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].

If you want to cancel the adjustment of all colors, press [RESET], and then [OK].

Summary of Contents for e-studio 5560c




























































































































































































Search results

Summary of Contents for e-studio 5560c

Reviews:

Toshiba e-studio 5560c, Copying Manual, Page: 139 / 188

Search results

Summary of Contents for e-studio 5560c

Reviews: