Toshiba e-studio 5560c Copying Manual Download Page 126

Page: 126 / 188

4 EDITING FUNCTIONS

124 Omit Blank Page

Omit Blank Page

You can remove blank sheets included in the scanned originals before copying is started. This function is called “omit
blank page”.

This function may not properly detect blank sheets included in the following types of originals:

- Half-tone originals
- Originals including sheets almost blank (e.g. blank pages having only page numbers)

If you copy 2-sided originals including blank sheets to 2-sided copy while this function is enabled, the front and
back sides of the originals and the copies will not match.

The sensitivity to detect blank pages can be changed. For details, refer to the

MFP Management Guide

Place paper in the drawer(s).

When using bypass copying, be sure to set the paper size.

Place the original(s).

Press [OMIT BLANK PAGE] on the EDIT menu.

Press [OK].

Omit blank page is now set.

Select other copy modes as required, and then press the [START] button on the control
panel.

Scanning and copying start. A message notifying you of the number of the blank sheets appears for approx. 5
seconds.

Summary of Contents for e-studio 5560c




























































































































































































Search results

Summary of Contents for e-studio 5560c

Reviews:

Toshiba e-studio 5560c, Copying Manual, Page: 126 / 188

Search results

Summary of Contents for e-studio 5560c

Reviews: