manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 124 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 124

4 EDITING FUNCTIONS

122    Image Repeat

Image Repeat

You can copy a certain area on an original repeatedly in the times that you specified. This function is called “image repeat”.

y

You can repeat copying up to 8 times.

y

Only standard size originals are available.

When registering this function into a template, be sure to select [DISABLE] of “AUTOMATIC START”. If [ENABLE] is 
selected, copies may not be made correctly because the original size is not detected.

 

 P.145 “TEMPLATES”

1

Place paper in the drawer(s).

When using bypass copying, be sure to set the paper size.

2

Press [IMAGE REPEAT] on the EDIT menu.

Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with 
force.

Breaking the glass could injure you.

3

Place the original on the original glass with its face 
up.

Place it with its bottom toward you. Align its top left corner against that 
of the original glass so that the original will be aligned with the original 
scales.

4

Read the following 4 values to specify the area using 
the left and top scales on the original glass.

X1:

 From the top left to the left edge of the selected area

X2:

 From the top left to the right edge of the selected area

Y1:

 From the top left to the upper edge of the selected area

Y2:

 From the top left to the lower edge of the selected area

Note that the marks of the original scale have a 2 mm (0.08") pitch.

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments