manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 120 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 120

4 EDITING FUNCTIONS

118    Image Direction

Image Direction

When you make 1-sided portrait originals to 2-sided copy by placing them in a landscape direction, normally the copied 
pages are “open to top”. With this function you can make them “open to left”. This function is called “image direction”.
When you make 2-sided “open to left” portrait originals to 1-sided copy, normally the copied pages exit in a different 
direction alternately. With this function, you can make them all exit in the same direction.

1-sided portrait original (placed in a landscape direction) -> 2-sided copy

2-sided “open to left” portrait original -> 1-sided copy

1

Place paper in the drawer(s).

2

Place the original(s).

3

Set duplex copying setting.

 

 P.77 “Duplex Copying”

4

Press [IMAGE DIRECTION] on the EDIT menu.

5

Press [OK].

Image direction is now set.

6

Select other copy modes as required, and then press the [START] button on the control 
panel.

No setting

“IMAGE DIRECTION” set

No setting

“IMAGE DIRECTION” set

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments