Toshiba e-studio 5560c Copying Manual Download Page 113

Page: 113 / 188

4.EDITING FUNCTIONS

Sheet Insertion 111

4 EDITING FUNCTIONS

Press the [BASIC] tab to display the BASIC menu. Then select the drawer in which
normal paper is placed (not the one for sheet insertion).

You must place the normal paper of the same size and direction as that for the insertion sheets in advance.

Select other copy modes as required, and then press the [START] button on the control
panel.

When the originals are placed on the RADF, scanning and copying start.
When they are placed on the original glass, follow steps 9 and 10.

Place the next original, and then press [NEXT COPY] on the touch panel or the [START]
button on the control panel.

Scanning of the next original starts. Repeat this procedure until the scanning of all the originals is finished.

When the scanning of all the originals is finished, press [JOB FINISH] on the touch
panel.

Copying starts.

Summary of Contents for e-studio 5560c




























































































































































































Search results

Summary of Contents for e-studio 5560c

Reviews:

Toshiba e-studio 5560c, Copying Manual, Page: 113 / 188

Search results

Summary of Contents for e-studio 5560c

Reviews: