manualshive.com logo in svg

Toshiba e-studio 5560c, Copying Manual, Page: 111 / 188

Share
Download
Toshiba e-studio 5560c Copying Manual Download Page 111

4 EDITING FUNCTIONS

 Sheet Insertion    109

Sheet Insertion

You can insert a special type of paper such as colored paper at the desired page. This function is called “sheet insertion”. 
You can insert up to 2 types of sheets for a total of 50 pages. The sheet insertion mode has the following 2 types:

COPIED:

 Inserts a copied sheet, replacing the specified page.

BLANK:

 Inserts a blank sheet before the specified page.

1

Place sheets for sheet insertion.

Place them on the bypass tray or in a drawer previously set for insertion sheets. The paper for the insertion sheets 
must be placed in a different paper source than normal paper.

y

When placing paper in a drawer for sheet insertion, be sure to select “INSERT 1” or “INSERT 2” as a paper 
type, and also set the paper size and thickness.

 

 P.17 “Setting paper type”

y

When placing paper on the bypass tray, be sure to set the paper size and thickness.

 

 P.37 “Bypass Copying”

y

Place the paper for insertion sheets of the same size as normal paper in the same direction.

2

Place the normal paper in the drawer(s).

3

Place the original(s).

When placing them on the original glass, they must be placed from the first page.

4

Press [SHEET INSERTION] on the EDIT menu.

REPORT

2003

1

2

3

4

4

REPORT2003

2

3

1

3

2

1

Summary of Contents for e-studio 5560c





























































































































































































Reviews:

No comments