manualshive.com logo in svg

Toshiba E-STUDIO 5518A, Manual, Page: 6 / 108

Share
Download
Toshiba E-STUDIO 5518A Manual Download Page 6

 

e-STUDIO Job Shops 

6 

Add Paper 

When a drawer runs out of paper, the drawer display on the touch panel starts blinking.  
Perform the following steps to add paper to a drawer.

 

1

.  To add/replace paper: 

a)  Pull

 out the drawer 

 

 

 

2.

  Open the ream of paper and 

remove any creased sheets.  
 
Note: Remember to fan the ream of 
paper to reduce static charges in 
the paper. 

 

 

 

 

 

3.

  

Place

 the ream of paper into the 

drawer, face up. 
 
Note: Refer to the paper height 
guides on the side of the drawer to 
prevent overfilling.  Maximum is 
600 sheets for 17 lbs. Bond, 550 
sheets for 20 lbs.

 

 

 

 

4. 

Adjust

 the front and side guides 

to match the paper size and 
orientation.

)

 

 
Note:  If you change the paper size 
and/or the paper orientation, 
change the paper size indicator at 
the front, right corner or the drawer. 
 

5.

  

Close

 the drawer.

 

 

END

 

 

 
 

 

Summary of Contents for E-STUDIO 5518A













































































































Reviews:

No comments