Toshiba e-STUDIO 407CS Series, Printing Manual

Page: 51 / 204

2.PRINTING FROM WINDOWS
Setting Up Print Options 49
2 PRINTING FROM WINDOWS
Original Image Quality Type
Select the image quality type to be applied as the based image quality.
2) Halftone
This sets how halftones are printed.
- Auto — Select this to print using proper halftone depending on the contents in the document automatically.
- Smooth — Select this to print halftone smoothly.
- Detail — Select this to print halftone in detail.
3) Resolution
This sets the resolution for printing.
- 600 dpi — Select this to print in 600 x 600 dpi.
- 600 x 1200 dpi
*1
— Select this to print in 600 x 1200 dpi.
*1 Images are reproduced more smoothly because jaggies on the outlines of small text or fine lines such as graphics are suppressed.
However, 600 dpi is recommended for photos because the tone reproduction level of the image is higher.
Note that if the resolution is 1200 dpi, it takes longer than 600 dpi to print out because the capacity of the data being handled is larger.

When [Photograph] or [Presentation] is selected in [Image Quality Type] of the [Image Quality] tab, [600 x 1200
dpi] cannot be displayed.

When [600 x 1200 dpi] is selected, the functions below are not available.
- Booklet printing
- Automatic change of paper source
- Auto Trapping
4) Use Black for All Text
Select this check box to print all text in 100% black except white texts.
This function is available only for the printer drivers below.
-
Universal Printer 2
- Universal XPS
5) Distinguish Thin Lines
Select this check box to print thin lines clearly.
6) Pure Black
Select this check box to print the black contents using black toner. When this box is selected, please select how this
function applies in the [Apply to] box.
7) Pure Gray
Select this check box to print the gray scale contents using black toner. When this box is selected, please select how
this function applies in the [Apply to] box.
The Pure Gray option is not available when [Pure Black] is not enabled.
8) Apply to
Select how the Pure Black and Pure Gray functions apply.
- Auto — Select this to automatically select areas to be printed using black toner when you want to print the black
(or black and gray scale) contents using its toner. When this option is selected, appropriate areas are printed using
black toner according to the Image Quality Type option.
- Text — Select this to print only black text or black-and-gray text using black toner.
- Text & Graphic — Select this to print only black text and graphics, or black-and-gray text and graphics using black
toner.
- Text, Graphic & Image — Select this to print all black areas or all black-and-gray areas using black toner.
9) Black Overprint
Select this check box when printing background content that has black text overlaid on it. If this is enabled, the gap
between the text and the background is minimized and color deviation is prevented. If this is not enabled, the
background of the black content will not be printed.
This function is available only for the printer drivers below.
-
Universal Printer 2 (PostScript)
- Universal PS3