7
7-4
Fiery WebSpooler
Errors
—Jobs with an error are shown in red. To display the error, double-click the job
line. Note that you cannot check the job properties or hold a job with an error.
N
OTE
:
If your job does not appear anywhere in the Fiery WebSpooler window, it may
have already been printed; if so, it will appear in the Job Log. To view the Job Log,
choose Show Job Log from the Window menu. (For more information on the Job Log,
see page 7-8.)
If the job does not appear in the Job Log, it may have been moved to the Archive
window by the operator. The Archive window cannot be viewed with
Fiery WebSpooler; you must contact the operator or look at the Command
WorkStation display to check this.
Manipulating job options and job flow
Using the commands in the Job menu, you can alter the destinations, priorities and
other characteristics of jobs that appear in the Fiery WebSpooler window.
To understand the effect each of these commands has on a job, you need to understand
the way the GA-1040 handles PostScript and raster data, and how jobs are activated or
held in the various stages of processing. See Chapter 1 for this background information
before manipulating jobs with Fiery WebSpooler. Also, the commands in the
Fiery WebSpooler Job menu have identical counterparts on the Command
WorkStation. For background and information about these commands, see
Chapters 1 and 2.
