Toshiba e-Studio 332s User Manual Advanced Download Page 82

Page: 82 / 177

List of the Device Setting Menu Items

- 82 -

Easy Setup

Memo

To enter the [

Easy Setup

] menu, an administrator password is necessary. The default password is "aaaaaa".

If [

Admin Setup

]>[

Fax Server Function

]>[

Environmental setting

]>[

Fax Server Function

] is set to [

], "Fax Setting"

is not displayed.

Item

Description

Date/
Time
Setting

Time Zone

Sets the time zone in relation to GMT.

Daylight Saving

Sets daylight saving.

Server

SNTP Server (Primary)

Sets the SNTP server to use for setting the current date
and time. Maximum 64 characters.

SNTP Server (Secondary)

Manual

Date

Sets the current date and time manually.

Time

Fax Set-
ting

FAX Number

Sets the fax number for the machine.Maximum 20 char-
acters.

Sender ID

Sets a sender ID. Maximum 22 characters.

Network
Setting

Manual setting IP Address

Sets the IP address. Maximum 15 characters. (You can
enter a value between 000.000.000.000 and
255.255.255.255)

Subnet Mask

Sets the subnet mask. Maximum 15 characters. (You can
enter a value between 000.000.000.000 and
255.255.255.255)

Default Gateway

Sets the default gateway address. Maximum15 charac-
ters. (You can enter a value between 000.000.000.000
and 255.255.255.255)

DNS Server (Primary)

Sets the IP address for a Primary DNS server. Maximum
15 characters. (You can enter a value between
000.000.000.000 and 255.255.255.255)

DNS Server (Secondary)

Sets the IP address for a Secondary DNS server. Maxi-
mum 15 characters. (You can enter a value between
000.000.000.000 and 255.255.255.255)

WINS Server (Primary)

Sets the name or the IP address for theWINS server.
Maximum 15 characters. (You can enter a value between
000.000.000.000 and 255.255.255.255)

WINS Server (Secondary)

Sets the name or the IP address for theWINS server.
Maximum 15 characters. (You can enter a value between
000.000.000.000 and 255.255.255.255)

Auto setting

Obtains an IP address automatically.

E-mail
Setting

Mail Server Address

Sets the IP address or host name for the SMTP server.
Maximum 64 characters.

Set Sender's Address (from)

Sets an e-mail address for the machine.

Receive Settings

Sets received setting for email.

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands