Toshiba e-Studio 332s User Manual Advanced Download Page 57

Page: 57 / 177

Useful Operations for Printing From a Computer

- 57 -

Printin

Collating Pages

You can print copies of multiple sets of a

multipage document.

Note

This function may not be available in some applications.

Turn off the page collating mode in the application when
you use this function with the Windows PS and Mac OS X
PS printer driver.

This function is not available with the Windows PCL printer
driver.

This function is not available with the Mac OS X PCL printer
driver in Mac OSX 10.5 to 10.6.

For Windows PCL XPS/PS Printer

Driver

Open the file you want to print.

From the [

File

] menu, select [

Print

Click [

Preferences

Select [

Job Options

] tab.

Select the number of print copies from

[

Copies

], and check the [

Collate

] box.

Configure other settings if necessary and

then start printing.

For Mac OS X PCL Printer Driver

Open the file you want to print.

From the [

File

] menu, select [

Print

Select [

Paper Handling

] from the panel

menu. (For Mac OS X 10.7)

Select [

Copies & Pages

] from the panel

menu. (For Mac OS X 10.5)

Check the [

Collate Pages

] box. (For

Mac OS X 10.7)

Check the [

Collated

] box. (For Mac OS X

10.5)

Memo

Open the Detailed Setup Menu by pressing the [

Show

Details

] button in Max OS X 10.7 or by clicking the

triangle symbol at the side of [

Printer

] menu in Max OS X

10.5 to 10.6.

For Mac OS X PS Printer Driver

Open the file you want to print.

From the [

File

] menu, select [

Print

Select [

Printer Features

] from the

panel menu.

Select [

Job Options

] from [

Feature

Sets

Check the [

Collated

] box.

Memo

Open the Detailed Setup Menu by pressing the [

Show

Details

] button in Mac OS X 10.7 or by clicking the

triangle symbol at the side of [

Printer

] menu in Mac OS X

10.5 to 10.6.

Setting the Page Order

You can set whether pages are printed in forward

or reverse order to suit your needs.
If you want pages to be stacked in numeric order,

forward order is usually appropriate with the face

down stacker, and reverse order with the face up

stacker.
If using a face-up stacker, set the printing to run

in the reverse order to stack the paper in the

order of the pages.

Note

Reverse order is not available with the Windows PCL/PCL
XPS printer driver.

If the face up stacker is not opened, pages are output on
the face down stacker.

For Windows PS Printer Driver

Open the file you want to print.

From the [

File

] menu, select [Print].

Click [

Preferences

On the [

Layout

] tab, select [

Front to

Back

] or [

Back to Front

] from [

Page

Order

Configure other settings if necessary and

then start printing.

Memo

If [

Page Order

] does not appear, click [

Start

]>[

Devices

and Printers

]> right-click the TOSHIBA e-STUDIO403S

icon > select [

Printer properties

]>[

TOSHIBA

e-STUDIO403S(PS)

]>[

Advanced

] >[

Enable advanced

printing features

For Mac OS X PCL/PS Printer Driver

Open the file you want to print.

From the [

File

] menu, select [

Print

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands