Toshiba e-Studio 332s User Manual Advanced Download

Page: 21 / 177

Various Functions for Transmission

- 21 -

xin

Reference

When [

Broadcast Destination

] is enabled, the

destination numbers are displayed before transmission.
For details, refer to

"Checking Broadcast Destination" P. 26

For details on how to cancel transmission, refer to the
User's Manual Basic.

Using From the Group List

The group list is useful for broadcast

transmission. Register destination group lists in

advance.

Reference

For details on transmission using the group list, refer to
the User's Manual Basic.

Transmission at a Specified
Time (Set Tx time)

This function allows you to instruct the machine

to transmit faxes at a specified time. When you

set a fax job to be sent later, the fax data is

stored in memory and automatically sent at the

specified time.
Up to 20 jobs can be scheduled up to one month

in advance.

Place your document with text face up in

the ADF or face down on the document

glass.

Press the <

FAX/HOOK

> key.

Check that [

Fax

] is selected and press

to open the fax start screen.

Press the to select [

Fax Functions

]

and then press .

Press the to select [

Delayed Tx

] and

then press .

Press the to select [

] and then

press .

Press the or to select the desired
date and time and then press .

- To move to the next box, press the .
- Dates are displayed as [

Date/Month

Press the until the start screen

appears.

Press the to select [

Add Destination

]

and then press .

Specify a destination.

Press

Memo

When you want to change the specified time of a
reservation, cancel the reservation and make another one.

You can make reservations for other fax jobs while the
machine is transmitting.

Reference

For details on how to cancel a fax job, refer to the User's
Manual Basic.

ONO

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands