Toshiba e-STUDIO 257 Copying Manual Download Page 74

Page: 74 / 172

3 BASIC COPY MODES

72 Selecting Finishing Mode

Select other copy modes as required, and then press the [START] button on the control
panel.



Rotate sort mode

When you make more than one set of copies, one set can be made to exit on top of another set, alternating in

portrait and landscape directions. This mode is called the rotate sort mode. Use 2 drawers and 2 stacks of

paper of the same size. Place one stack of paper in one drawer in a portrait direction and place the other in

another drawer in a landscape direction before you start copying.



A4, B5 and LT sized paper placed on the drawer or bypass tray can be used.



The rotate sort mode is not available when Automatic Paper Selection is selected.

Place paper in the drawer(s).

Place one stack of paper in one drawer in a portrait direction and place the other in another drawer

in a landscape direction.

Place the original(s).

Press [FINISHING] on the touch panel.

Select [ROTATE SORT], and then press [OK].

Key in the desired number of copies.

Select other copy modes as required, and then press the [START] button on the control
panel.

Summary of Contents for e-STUDIO 257











































































































































































Search results

Summary of Contents for e-STUDIO 257

Reviews:

Toshiba e-STUDIO 257, Copying Manual, Page: 74 / 172

Search results

Summary of Contents for e-STUDIO 257

Reviews: