Toshiba e-studio 2555c, Service Manual

Page: 989 / 1558

11
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
FIRMWARE UPDATING
11 - 5
11.2 Firmware Updating with USB Device
To update firmware, store update program and firmware data files in the USB device.
The update program is "signature.H.sig", and it needs to be stored in the USB device. It is necessary
for updating firmware except that of the System firmware.
For the data file for each firmware, refer to the following tables.
Notes:
When performing the update, use the latest program.
11.2.1 Firmware type and data file name for updating
Equipment
Option
Firmware Stored Data file name Display
System firmware System control PC
board
(SYS board) T212SF0Wxxxx.tar
*
xxxx is version.
SYSTEM FIRMWARE
(OS Data)
Engine firmware Logic PC board
(LGC board) T210MWW.xxx
*
xxx is version.
ENGINE FIRMWARE
Scanner firmware System control PC
board
(SYS board) T212SLGWW.xxx
*
xxx is version.
SCANNER FIRMWARE
System software HDD T212HD0Wxxxx.tar
*
xxxx is version.
SYSTEM SOFTWARE
(HD Data)
PFC firmware Logic PC board
(LGC board) T210MWW.xxx
*
xxxx is version.
PFC FIRMWARE
Firmware Stored Data file name Display
RADF firmware DLG board
(MR-3025) H576DFWW.0xxx
*
xxx is version.
RADF FIRMWARE
Finisher firmware
(MJ-1036) Finisher control PC
board FIN1036T.xxx
*
xxx is version.
FINISHER FIRMWARE
Finisher firmware
(MJ-1107) Finisher control PC
board FIN1107T.xxx
*
xxx is version.
FINISHER FIRMWARE
Finisher firmware
(MJ-1108) Finisher control PC
board FIN1108T.xxx
*
xxx is version.
FINISHER FIRMWARE
Saddle stitcher
firmware (MJ-
1108) Saddle stitcher PC
board SDL1108T.xxx
*
xxx is version.
SADDLE FIRMWARE
Hole punch unit
firmware (MJ-
6104) Punch control PC
board PUN6104T.xxx
*
xxx is version.
PUNCH FIRMWARE