Toshiba e-studio 2555c, Service Manual

Page: 90 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 50
3.9.3 LED print head lifting mechanism
The LED print head is contacted or released by the LED print head contact/release lever.
When this lever is held down to the front side of this equipment, the link arm is slid to the front side
together with the lever.
Since the LED print head is positioned by the guide of the link arm, it is lowered (released) as the guide
is lowered.
A gap between the LED print head and the drum in a contacting status is kept at a specified value by
the LED gap spacer.
Fig. 3-29
[1] Drum
[2] LED print head
[3] Link arm
[4] LED print head contact/release lever
[5] LED gap spacer
[1]
[3]
[2]
[4]
[5]
[5]