
8
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8 - 115
[EF11] Saddle Stitch Finisher stapling error (front)
MJ-1108
[EF12] Saddle Stitch Finisher stapling error (rear)
MJ-1108
[EF13] Saddle stitch unit paper holding home position detection error
MJ-1108
Classification
Error item
Finisher jam (Saddle section)
Front stapling is not correctly done.
Check item
Measures
Finisher
•
Is there any paper remaining on the paper transport path
in the Finisher or the equipment, or on the finishing tray?.
•
Is the jam released by taking off the front staple cartridge
from the Finisher and removing the staple sheet slid from
the staple case?
Front saddle stapler drive unit
•
Unit check
•
Connector check
•
Harness check
Saddle controller board
•
Connector check (CN3)
•
Board check
Replace parts
Remarks
Front saddle stapler drive unit
Saddle controller board
Classification
Error item
Finisher jam (Saddle section)
Rear stapling is not correctly done.
Check item
Measures
Finisher
•
Is there any paper remaining on the paper transport path
in the Finisher or the equipment, or on the finishing tray?.
•
Is the jam released by taking off the rear staple cartridge
from the Finisher and removing the staple sheet slid from
the staple case?
Rear saddle stapler drive unit
•
Unit check
•
Connector check
•
Harness check
Saddle controller board
•
Connector check (CN3)
•
Board check
Replace parts
Remarks
Rear saddle stapler drive unit
Saddle controller board
Classification
Error item
Finisher jam (Saddle section)
The paper holder home position cannot be detected.
Summary of Contents for e-studio 2555c
