
e-STUDIO2555C/3055C/3555C/4555C/5055C
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 112
MJ-1108
[ED15] Paddle home position error
MJ-1107
MJ-1108
Finisher controller PC board
Check item
Measures
Rear alignment plate
Move the rear alignment plate.
Fix any mechanical problem.
Rear alignment plate home
position sensor
Check if there is a disconnection of the connector, incorrect
installation or breakage of the rear alignment plate home position
sensor (S8). If there is, reinstall the sensor correctly or replace it.
Check if the connector (CN18) on the finisher controller PC board is
disconnected from the rear alignment plate home position sensor
(S8) and the harnesses are open circuited. Correct if so.
Rear alignment motor
Check if the connector (CN17) on the finisher controller PC board is
disconnected from the rear alignment motor (M6) and the
harnesses are open circuited. Correct if so.
Parts to be replaced
Remark
Rear alignment plate home
position sensor
Rear alignment motor
Finisher controller PC board
Classification
Error content
Other paper jam
Paddle home position error
Check item
Measures
Paddle
Rotate the paddle. If there is any mechanical problem, fix its
mechanism.
Paddle home position sensor
Paddle motor
Finisher controller PC
board
Check if the connectors on the finisher controller PC board are
disconnected from the paddle home position sensor (S3) and the
paddle motor (M8), or the harnesses are open circuited. Correct if
any.
Parts to be replaced
Remark
Paddle motor
Paddle home position sensor
Finisher controller PC board
Check item
Measures
Paddle
Rotate the paddle. If there is any mechanical problem, fix its
mechanism.
Parts to be replaced
Remark
Summary of Contents for e-studio 2555c
