Toshiba e-Studio 2505F User Manual Download

Page: 40 / 162

2 COPY FUNCTIONS

38 Copy Settings



Selecting the paper

You can select the paper source in which the paper of the desired size and type is loaded.



P.18 “Acceptable paper types”



Selecting the paper source

Press or to select the item displayed on the LCD screen, and then press .

Press or to select the setting item.

To select the paper size:

1) Press .

2) Press or to select the paper size, and then press [OK].

To accept the setting:

Press [OK].

Menu Functions

Settings

Description

DRAWER

Drawer 1 XX

Uses the drawer as the paper source. The variable “XX” indicates
the paper size.

Bypass XX

Uses the bypass tray as the paper source. Available only when
the paper is loaded on the bypass tray. The variable “XX”
indicates the paper size.

APS

Automatic Paper Selection. Detects the size of the original and
selects paper of the same size automatically. Available only when
the original is placed on the Automatic Document Feeder.



This function may not work properly for totally dark originals or originals with dark borders.



When placing long originals (A3, B4, A4-R, LD, LG, COMP, or 8K), open the original holder
so that the size of the original can be detected correctly.

For the detectable original sizes, see the following page:



P.30 “Acceptable originals”

READY

100%

TEXT/PHOTO

Summary of Contents for e-Studio 2505F

































































































































































Search results

Summary of Contents for e-Studio 2505F

Reviews:

Related manuals for e-Studio 2505F

Brands by name

Popular brands

Toshiba e-Studio 2505F, User Manual

Search results

Summary of Contents for e-Studio 2505F

Reviews:

Related manuals for e-Studio 2505F

Brands by name

Popular brands